60 lines
2.3 KiB
Markdown
60 lines
2.3 KiB
Markdown
# Home-Assistant Integration
|
|
|
|
## What is Home-Assistant
|
|
|
|
From https://www.home-assistant.io/
|
|
|
|
!!! note ""
|
|
Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
|
|
|
|
|
|
## Preparation
|
|
|
|
The following placeholders will be used:
|
|
|
|
- `hass.company` is the FQDN of the Home-Assistant install.
|
|
- `passbook.company` is the FQDN of the passbook install.
|
|
|
|
!!! note
|
|
|
|
This setup uses https://github.com/BeryJu/hass-auth-header and the passbook proxy for authentication. When this [PR](https://github.com/home-assistant/core/pull/32926) is merged, this will no longer be necessary.
|
|
|
|
## Home-Assistant
|
|
|
|
This guide requires https://github.com/BeryJu/hass-auth-header, which can be installed as described in the Readme.
|
|
|
|
Afterwards, make sure the `trusted_proxies` setting contains the IP(s) of the Host(s) passbook is running on.
|
|
|
|
With the default Header of `X-Forwarded-Preferred-Username` matching is done on a username basis, so your Name in Home-Assistant and your username in passbook have to match.
|
|
|
|
If this is not the case, you can simply add an additional header for your user, which contains the Home-Assistant Name and authenticate based on that.
|
|
|
|
For example add this to your user's properties and set the Header to `X-pb-hass-user`.
|
|
|
|
```yaml
|
|
additionalHeaders:
|
|
X-pb-hass-user: some other name
|
|
```
|
|
|
|
## passbook
|
|
|
|
Create a Proxy Provider with the following values
|
|
|
|
- Internal host
|
|
|
|
If Home-Assistant is running in docker, and you're deploying the passbook proxy on the same host, set the value to `http://homeassistant:8123`, where Home-Assistant is the name of your container.
|
|
|
|
If Home-Assistant is running on a different server than where you are deploying the passbook proxy, set the value to `http://hass.company:8123`.
|
|
|
|
- External host
|
|
|
|
Set this to the external URL you will be accessing Home-Assistant from.
|
|
|
|
Create an application in passbook and select the provider you've created above.
|
|
|
|
## Deployment
|
|
|
|
Create an outpost deployment for the provider you've created above, as described [here](../../../outposts/outposts.md). Deploy this Outpost either on the same host or a different host that can access Home-Assistant.
|
|
|
|
The outpost will connect to passbook and configure itself.
|